Urethane Slurry Flooring System
Blue Field Floors URETHANE SLURRY SYSTEM is a low odor, self-leveling slurry to be applied at 3/16" thickness and broadcast to yield a 1/4" finished system. It can be applied with a pin rake, screed rake or flat trowel. It is designed to protect concrete, wood and steel substrates from thermal shock, impact, corrosion, mild chemical attack and abrasion. A decorative quartz broadcast may be specified as an upgrade to the standard system.
Advantages
- Rapid cure and hardness development
- Water-based
- Low Odor
- Hot cooking oil resistance
- Low temperature cure
- Impact resistant
- Moisture insensitive
Uses
- Food processing kitchens
- Commercial kitchens
- Food and Beverage plants
- Sugar processing plants
- Meat and Poultry plants
- Restrooms and Concession stands
Different seal coat option:
- Standard Epoxy Coating
- High Performance CR Epoxy
- Hi-Solids Polyurethane Enamel, Gloss, Satin
or Flat - 100% Solids Urethane
- Epoxy Satin Coating-Satin
| Typical Physical Properties | |
|---|---|
| Color Decorative Upgrade: |
Red or Gray Selected Ceramic Carpet Blends |
| Cure Time - Recoat - Foot Traffic - Full Serive |
4-5 hours 6-8 hours 10-12 hours |
| Abrasion ResistanceASTM D 4060, CS-17 Wheel | 20-30 mgs |
| Resistance to Elevated Temperatures MIL-D-31341 |
No slip or flow at required temperature of 158° |
| Adhesion ASTM D 4541 |
350 psi - 100% concrete failure |
| Hardness, Shore D ASTM D 2240 |
75 |
| Tensile Strength ASTM C 307 |
500-600 psi |
| Compressive Strength ASTM C 579 |
5,000 psi |
| Flexural StrengthASTM C 580 | 3,700 psi |
| Impact Resistance MIL-D 3134 |
Withstands 16 ft. lbs. without cracking, delaminating or chipping |
| ASTM D=Resin only | |
